HOLIDAY SHIPPING SCHEDULE: Virtual Industries, Inc. will be closed for shipping from December 23, 2014 through January 4, 2015. Happy Holidays.
You are here: Home » Compressed Air Powered Wafer Wands » VVSW-NC-MW6
STEALTH-WAND ELITE Kits
[VVSW-NC-MW6]
$445.90
1+ $445.90

 The STEALTH-WAND ELITE operates directly on 30 to 50 psi compressed air or nitrogen.   The normally closed Stealth-Vac Elite vacuum pen contains a whisper quiet venturi vacuum generator that is activated only when the control button is depressed.  This helps conserve factory compressed air when the tool is not in use.  The vacuum level can be controlled by adjusting the input pressure.   At 50 psi input the vacuum level is 21 InHg with 2 lpm of free air flow, at 30 psi input the vacuum level is 18 InHg with 1.75 lpm of free air flow and at 10 psi input the vacuum level is 3 InHg with .75 lpm of free air flow.  This feature is importent for handling thin wafers.

The normally closed STEALTH-WAND ELITE Kit is supplied with:
  6 feet of 1/16 inch air hose
  A 1/8 NPT to 1/16" barb adaptor for the supply line
  The vacuum generating handle
  A VMWT-B wafer tip
  A VBM-4 wafer wand holder.

With compressed air supplied at the rear of the tool it is ready for use as follows:

1.    Attach a vacuum tweezer tip slightly smaller than the part you need to handle.
2.    Touch the vacuum tip squarely to the wafer or solar cell and depress and hold the button.  The part is now   grasped.
3.    Move the part to where you want it.  Release the control button to release the part.

Quantity:
Or Build Quote