Warning: I am able to write to the configuration file: /Applications/MAMP/htdocs/Virtual-II/includes/configure.php. This is a potential security risk - please set the right user permissions on this file.
HOLIDAY SHIPPING SCHEDULE: Virtual Industries, Inc. will be closed from Thursday, December 24th through Sunday, January 3rd. Our Last day to ship for web store orders will be Monday, December 21st.
  Contact Us
Buy Online or Contact Us: 1-719-572-5566 or 1-800-530-8377

View all Product Instructions

SMD-VAC-HP ESD Safe Vacuum Handling Tool Model No. V8100A Model No. V8100A-220

Download PDF Product Instructions

Operation of the SMD-VAC-HP

  1. Connect the small diameter vacuum hose to the vacuum fitting on the front of the SMD- VAC. Make sure the hose is pushed all of the way on. Connect the other end of the vacuum hose to the rear of the vacuum handle, again make sure the hoses pushed all the way on.
  2. Select a probe with a vacuum cup that is slightly smaller in diameter to the outline of the parts that you want to pick and place. Securely install it on the tapered end of the vacuum handle. Selecting a vacuum cup that is too large or too small will result in improper operation.
  3. Connect the 3 wire SMD-VAC power cord to input power. Turn the ON/OFF switch to the on position.
  4. To pick and place a part:
    • Gently place the vacuum cup on top of the part that you wish to pick up. The part should now be firmly grasped by the vacuum cup.
    • Now move the part to where you want it.
    • To release the part simply depress the button with your finger, the part should now be released.
  5. Remember to turn the unit off when you are finished.

Using the optional foot switch P/N VFS-1

PRECISION PARTS PLACEMENT

  1. Connect the small diameter vacuum hose to the vacuum fitting on the front of the SMD-VAC. Make sure the hose is pushed all the way on. Connect the other end of the vacuum hose to the rear of the vacuum handle that has NO control hole (V3021 or V3121-RF), again make sure the hose is pushed all the way on.
  2. Plug the foot switch connector into the jack on the rear of the SMD-VAC-HP that is labeled as EXTERNAL SWITCH.
  3. Select a probe with a vacuum cup that is slightly smaller in diameter to the outline of the parts that you want to pick and place. Securely install it on the tapered end of the vacuum handle. Selecting a vacuum cup that is too large or too small will result in improper operation.
  4. Connect the SMD-VAC to input power. Turn the ON/OFF switch to the on position. Adjust the flow control for your particular operation.
  5. To pick and place a part:
    • Gently place the vacuum cup on top of the part that you wish to pick up. The part should now be firmly grasped by the vacuum cup.
    • Now move the part to where you want it.
    • Depress the foot switch, the part should now be released. 5. Remember to turn the unit off when you are finished.

Download PDF Product Instructions


Receive email-only deals, special offers & product exclusives

Copyright © 2010 - 2016   Virtual Industries, Inc.