Warning: I am able to write to the configuration file: /Applications/MAMP/htdocs/Virtual-II/includes/configure.php. This is a potential security risk - please set the right user permissions on this file.
HOLIDAY SHIPPING SCHEDULE: Virtual Industries, Inc. will be closed from Thursday, December 24th through Sunday, January 3rd. Our Last day to ship for web store orders will be Monday, December 21st.
  Contact Us
Buy Online or Contact Us: 1-719-572-5566 or 1-800-530-8377

View all Product Instructions

ADJUST-A-VAC AV-6000 Vacuum Tweezer - ESD Safe

Download PDF Product Instructions

Operation of the ADJUST-A-VAC AV-6000

  1. Insure that the replaceable filter housing has a filter installed and is snuggly tightened to insure no vacuum leaks. Turning clockwise tightens. connect one end of the vacuum hose to the barb fitting on the filter housing and the other end to the barb on the vacuum pen handle that has the push button.
  2. Select a probe with a vacuum cup that is slightly smaller in diameter to the outline of the parts that you want to pick and place. Securely install it on the tapered end of the vacuum handle. Selecting a vacuum cup that is too large or too small will result in improper operation.
  3. connect the 3 wire AV-6000 AdjustA-Vac power cord to input power. Turn the ON/OFF switch to the ON position. The LED vacuum level bar will glow at low brightness to show that power is on. To set the vacuum level for the parts you will be handling: First rotate the VAcuuM ADJuST knob fully counterclockwise to set the vacuum to the minimum level. Secondly place the pick-up tip flat on the part that you want to pick up. if the part is not grasped then rotate the VAcuuM ADJuST knob clockwise until the part is grasped sufficiently for handling. The display bars will light up brightly to show the level of vacuum that is present. Push the vacuum release button on vacuum handle to release the part. When using small part tips several of the bars may illuminate brightly due to the tiny orifice of the tip being used.
  4. To pick and place a part: gently place the vacuum cup on top of the part that you wish to pick up. The part should now be firmly grasped by the vacuum cup. The display bars will light up brightly to show the level of vacuum that is present.
  5. Now move the part to where you want it. To release the part simply depress the button with your finger, the part should now be released and the display bars will indicate the reduced vacuum level.
NOTE: When using small parts tips a partial level of vacuum will be displayed when the tip is installed.

Download PDF Product Instructions


Receive email-only deals, special offers & product exclusives

Copyright © 2010 - 2016   Virtual Industries, Inc.