The ANTI-WOBBLE™ tool is designed for enhanced functionality when handling INTEL LGA CPU products. This tool improves placement accuracy when picking processor chips from a shipping tray and placing into precision sockets. The BULB-VAC™ features an ANTI-WOBBLE™ stiffener cone and a 1” (25.4mm) diameter Non-marking Static Dissipative Buna-N vacuum cup. This ANTI-WOBBLE™ tip is designed to work only with a 3/4" (19mm) or 1” (25.4mm) diameter vacuum cup. The rubber vacuum cup is required for proper operation. These tools operate very similar to a tweezer. Simply squeeze the vacuum bulb, place the soft suction cup to the part to be handled, then relax your squeeze and the part is firmly gripped. A second squeeze releases the part.
Overall dimensions are 3.4" (86.4mm) long by 1.46" (37.1mm) wide. All materials are ESD safe.
Applications for this tool include pick-and-place of any size of LGA processor. In the factory it is ideal for picking processors from trays and placing them into motherboard sockets. For field service operations it is ideal for picking the processor from the shipping tray and placing it into a motherboard socket. The anti-wobble cone provides stability when placing large processors into precision sockets. This tool can be used for handling a variety of large substrates.
VACUUM CUP REPLACEMENT
1. Replacement vacuum cups are available from Virtual Industries, Inc. Order NO. V9100-B
2. Hold the squeeze bulb in one hand and pull the vacuum cup off of the tool with your other hand.
3. Line up the hole in the stem of the replacement vacuum cup with the barb protruding from the tool tip and push the cup on while providing a turning motion to the surface of the vacuum cup with your thumb until the vacuum cup is seated.
4. The tool is now ready for use.