HOLIDAY SHIPPING SCHEDULE: Virtual Industries, Inc. will be closed from Wednesday, December 21st through Sunday, January 1st.
  Contact Us
Buy Online or Contact Us: 1-719-572-5566 or 1-800-530-8377
You are here: Home » Compressed Air Powered Wafer Wands » VVSW-NC-MW12

STEALTH-WAND ELITE Kits

[VVSW-NC-MW12]

$458.60


 The STEALTH-WAND ELITE operates directly on 30 to 50 psi compressed air or nitrogen.   The normally closed Stealth-Vac Elite vacuum pen contains a whisper quiet venturi vacuum generator that is activated only when the control button is depressed.  This helps conserve factory compressed air when the tool is not in use.  The vacuum level can be controlled by adjusting the input pressure.   At 50 psi input the vacuum level is 21 InHg with 2 lpm of free air flow, at 30 psi input the vacuum level is 18 InHg with 1.75 lpm of free air flow and at 10 psi input the vacuum level is 3 InHg with .75 lpm of free air flow.  This feature is importent for handling thin wafers.

The normally closed STEALTH-WAND ELITE Kit is supplied with:
  6 feet of 1/16 inch air hose
  A 1/8 NPT to 1/16" barb adaptor for the supply line
  The vacuum generating handle
  A VMWT-D wafer tip
  A VBM-4 wafer wand holder.

With compressed air supplied at the rear of the tool it is ready for use as follows:

1.    Attach a vacuum tweezer tip slightly smaller than the part you need to handle.
2.    Touch the vacuum tip squarely to the wafer or solar cell and depress and hold the button.  The part is now   grasped.
3.    Move the part to where you want it.  Release the control button to release the part.

Quantity:
Or Build Quote


Customers who bought this product also purchased

300mm Handling Tip for Large Wafers, Solar Cells and Flat Panels
300mm Handling Tip for Large Wafers, Solar Cells and Flat Panels

Receive email-only deals, special offers & product exclusives

Copyright © 2010 - 2017   Virtual Industries, Inc.